室温铁磁性Sr3YCo4O10.5+δ多晶有序化的烧结工艺及电磁性能

采用固相反应法制备了不同烧结温度(950~1 180 ℃)、烧结时间、烧结次数共7种工艺的Sr₃YCo₄O_10.5+δ多晶块材,通过热分析、XRD、SEM确定了有序化相变和最佳烧结工艺(1 180 ℃/24 h+1 180 ℃/24 h),并研究了多晶的电磁性能。结果表明,964 ℃完全晶化的四方相Sr₃YCo₄O_10.5在1 042 ℃吸氧(δ)完成有序化,生成Sr₃YCo₄O_10.5+δ,而1 100 ℃和1 180 ℃烧结的样品均出现(103)、(215)超结构峰,验证了其结构的有序性。块材均呈半导体电输运行为,二次烧结晶格完整性提高,晶粒长大,300 K时电阻率仅为0.06 Ω·cm,居里温度(T_c)~335 K,零场冷曲线(ZFC)上的Hopkinson峰源于低温时被冻结的磁矩随温度升高转向磁场方向,磁化强度在298 K达到最大,随后受热扰动的影响减小。室温铁磁性源于有序结构导致的中自旋或高自旋态Co³⁺的e_g轨道有序。     

Dielectric loss and electromagnetic absorption performance study of 1T/2H-MoS2/Mo2S3 nanocomposites with different ratios

High dielectric loss materials have an important application in electromagnetic (EM) absorption fields. In this paper, the ternary nanocomposites: 1T/2H-MoS₂/Mo₂S₃ with heterogeneous interfaces are synthesized by hydrothermal method. XRD, XPS, FTIR, SEM, and TEM measurements are applied to study the structure, morphology, and composition. The frequency spectra of complex permittivity (ε_r-f) are measured in 2–18 GHz by vector network analyzer. The results show that the nanocomposites have higher dielectric loss angle tangents than the reported 2H-MoS₂ absorbers. Based on the ε_r-f spectra, the reflection loss-frequency curves ($RL-f$) are simulated at given thicknesses. An effective absorption bandwidth of 5.2 GHz (12.8–18 GHz) and a $RL$ peak of −29.49 dB are achieved in a thin thickness of 1.62 mm, which are comparable to the reported 2H-MoS₂ absorbers with complex composition, showing that the 1T/2H-MoS₂/Mo₂S₃ nanocomposites have great application potential as an EM wave absorber in the K_u band.     

A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

超声共振法测定圆柱体材料弹性常数的影响因素分析

为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小.     

Accurate theoretical prediction of optical properties of BODIPY dyes

Boron-dipyrromethene dyes (BODIPY) are of great interest nowadays mostly due to their valuable optical properties. Nevertheless, no systematic research of the optical property dependence on the structure of dyes has been performed yet. In this work, analysis of the available quantum-chemical methods for BODIPY optical property calculations has been carried out. The accuracy of eight DFT functionals has been studied. The solvation effects upon excitation have been considered within two schemes. The methods that predict the absorption and emission spectra of BODIPY derivatives with high accuracy have been proposed. Using the suggested methods, the influence of nature of substituents and their position in the BODIPY core on the optical spectra of the dyes has been studied. A complex pattern of red- and blue-shifts in optical spectra in dependence of nature and position of substituents has been revealed. The results of this work provide the way for efficient design of BODIPY derivatives with desired optical properties.     

La掺杂和空位对ZnS磁性和光学性能影响的第一性原理研究

利用密度泛函理论框架下的平面波超软赝势法,通过第一性原理对La掺杂与Zn空位(V_(Zn))及La掺杂与S空位(V_S)共存的ZnS体系的电子结构、磁性机理、形成能及吸收光谱进行了研究.结果表明, La掺杂与空位(V_(Zn)或V_S)的空间位置最近时,掺杂体系的形成能最低,体系最稳定.另外,La掺杂与Zn空位共存时,体系具有磁性,且体系的净磁矩与La原子与Zn空位的相对位置有关;La掺杂与S空位共存时,掺杂体系无磁性,但此时体系的禁带宽度最窄且吸收光谱红移最显著.     

Dual-band isotropic metamaterial absorber based on near-field interaction in the Ku band

We numerically and experimentally investigate single-band and dual-band isotropic metamaterial absorbers (IMAs) based on metallic disks. By optimizing the diameter of the metallic disks and the thickness of the dielectric substrate, the single-band IMA is observed at 16.2 GHz with absorptivity of 97%. When adding one disk-pair to the structure, the dual-band IMA is obtained at 12.8 and 15.5 GHz due to the symmetry breaking. The physical mechanics is explained by near-field coupling effect and equivalent LC circuit model. The measurement results performed in the range 12–18 GHz show a good agreement with simulation and theoretical analysis. Our findings demonstrate a new approach to achieve dual-band and multi-band IMAs.     

Multifunctional Sulfur-Hyperdoped Silicon Nanoparticles with Engineered Mid-Infrared Sulfur-Impurity and Free-Carrier Absorption

Si nanoparticles (NPs), which are innovative promising light-harvesting components of thin-film solar cells and key-enabling biocompatible theranostic elements of infrared-laser and radiofrequency hyperthermia-based therapies of cancer cells in tumors and metastases, are significantly advanced in their near/mid-infrared band-to-band and free-carrier absorption via donor sulfur-hyperdoping during high-throughput facile femtosecond-laser ablative production in liquid carbon disulfide. High-resolution transmission electron microscopy and Raman microscopy reveal their mixed nanocrystalline/amorphous structure, enabling the extraordinary sulfur content of a few atomic percents and very minor surface oxidation/carbonization characterized by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. A 200-nm thick layer of the nanoparticles exhibits near−mid-infrared absorbance, comparable to that of the initial 380-micron thick n-doped Si wafer (phosphor-dopant concentration ≈10¹⁵ cm⁻³), with the corresponding extinction coefficient for the hyperdoped NPs being 4–7 orders higher over the broadband spectral range of 1–25 micrometers. Such ultimate, but potentially tunable mid-IR structured, multi-band absorption of various sulfur-impurity clusters and smooth free-carrier absorption are break through advances in mid-infrared (mid-IR) laser and radiofrequency (RF) hyperthermia-based therapies, as envisioned in the RF-heating tests, and in fabrication of higher-efficiency thin-film and bulk photovoltaic devices with ultra-broad (UV−mid-IR) spectral response.     

氨基酸官能团的太赫兹振动模式研究

对比于氨基酸的红外分析法,太赫兹波的电子能量更低,可实现无损检测。氨基酸分子内原子振动、分子间氢键的作用、以及晶体中晶格的低频振动均处于太赫兹波段,使其在太赫兹波段具有吸收峰,且不同的氨基酸分子太赫兹吸收峰不同,故可用氨基酸在太赫兹波段的这种“指纹特性”实现氨基酸类物质的定性分析。量子化学分析方法可以应用量子力学的基本原理和方法,研究稳定和不稳定分子的结构、性能及其之间的关系,还可以针对分子与分子间的相互作用、相互碰撞及相互反应等问题进行研究。通过量子化学计算方法计算氨基酸分子的太赫兹吸收谱,可以为氨基酸分子的太赫兹吸收峰匹配分子振动模式,对氨基酸定性分析有一定参考性与指向性,并为实验获取的样品太赫兹时域光谱提供理论支撑,在实验获得太赫兹吸收谱的基础上进行量子化学计算,还能为实验结果进行验证。首先利用太赫兹时域光谱技术获取了谷氨酰胺、苏氨酸、组氨酸的太赫兹吸收谱,分别构建这三种氨基酸样品在实物中以两性离子形式存在的单分子构型,利用量子化学计算方法在完成结构优化后进行太赫兹吸收谱模拟计算。计算结果表明三种氨基酸单分子的太赫兹吸收谱计算结果与实验获取的太赫兹吸收谱差异较大,但在高频段吸收峰峰位基本吻合。通过GaussView分别查看了这三种氨基酸分子在太赫兹段内的吸收峰对应频率处的振转情况,发现在高频段内三种氨基酸分子官能团均只发生转动而未见振动,并且转动模式基本一致。通过对氨基酸官能团的太赫兹吸收谱进行量子化学计算,将官能团在高频段内吸收峰对应频率处的振转模式与三种氨基酸分子在该段内吸收峰对应频率处的振转模式做了对比。研究表明,在氨基酸单分子构型下由量子化学方法计算所得的太赫兹吸收谱中,高频段内计算得出的模拟吸收峰与实验获取的太赫兹吸收峰基本吻合;振转模式分析发现,谷氨酰胺、苏氨酸、组氨酸在太赫兹高频段内的氨基酸官能团振转模式相同,三种氨基酸分子在高频段内的吸收峰主要来源于氨基酸官能团。因此,结合量子化学计算与太赫兹吸收谱可以实现氨基酸类物质的定性分析。